1 | 激光功率
Laser power |
最大输出功率 600 瓦,输出功率范围1 瓦至600瓦。
Max power 400W,output power scope from1Wto 600W. |
激光器种类
Laser tpye |
中国产高质 CO2 激光器
High quality chinese CO2 laser tube
|
|
2 | 工作面积
Working |
工作面积:1200*1800mm。工作面积通过软件限定及硬件定位开关限定。
working area: 1200×1800 mm。the working area by thesoftwareand area hardware positioning swich curb。 |
3 | 传动
Transmission
|
采用强动力无须保养的细分微步步进马达,运动传递通过精密滚珠丝杆而完成。Using the strong motive power and no need upkee’s setpmotor,motive transmission by precision ball bearing lead screwfinished. |
4 | 测量装置
Measurement
|
多向随动技术,光电装置的测量精度,密封设计可防尘污。
Muti-direction following tech. the electronic and light installlation’scalibration precision.seals designs and dust-proof |
5 | 抽取
Abstraction
|
通过集中式风机对台面及四周的烟气进行抽取,风机可独立放置。By collecting exhaust blower to platformand aroundplace’ssmog,blower can dependence upon place. |
6 | 水冷却
Cooler
|
机器配备一套水高级气冷却系统,数字科目/精确显示的电子恒温器,专用于激光机的全密封压缩机。 The machine is included one set cooler system. Digitalprogram/precision discover’s electron thermostat.exclusiveusing
the air-poof compressor of the laser system |
7 | 速度
Speed |
切割速度为 50-55cm/分钟,切割速度取决于激光性能及光路,材料成分,材料厚度及形状。
Cutting speed 50-55cm/min,the cut speed upontothelaserperformance and laser light direction , material basis, thicknessand shape. |
8 | 精度
Precision
|
定位高精度: ±0.05 mm ,重复精度: ±0.02 mm,以上参数在20度室温下得出,切割精度取决于版材种类,材料成分,材料厚度及形状。Positioning precision:±0.05 mm,repeat precision:±0.02mm,aboveall of parameter got by 20℃ house digress situation,cut precision
belongs to what style material, basis, thickness andshape |
9 | 重量
Weight |
1.5 吨
1.5 tons
|
10 | 机器尺寸
Machine
|
2100mm * 2800mm*1400mm(2100*3800*1400mmmoving) Size |
11 | 切割材料及厚度
Cutting materialand thickness |
木板 6-22mm,PVC 胶板,亚克力等非金属材料、2毫米碳钢板6-22mm plywood, PVC board ,acrylics and 2mmcarbonsteel
|
12 | 支持输入、输出文件格式Input andformat | DXF、PLT
output file
|
FOSHAN WIN LONGTRADINGCO.,LTD.
13 | 供电电源
Supply
|
单相 220V±5% 50HZ-60HZ 15 A(机器+冷水机)+10A(抽风机)
Single phase 220V±5% 50HZ-60HZ 15 A (includethemachine, power water cooler and exhaust fans) |
|
14 | 损耗件
Loss part |
激光管、反光镜、聚焦镜
Laser tube,reflect mirror,focus lens
|
|
15 | 使用该设备配备的条件Accessorycondition | 环境
Environ ment |
占地面积 3000mm×3000mm,约9 平米,环境通风、设有排烟设施,如排气扇
working interspace: 3000mm×3000mm; about 9square meter;need install the exhaust fan.
|
辅
Accessory equipment |
助 设 备
需要配备 3P 压缩气体、5000W 稳压器、电脑一套(客户自备,主要原因是电 脑、空压机、稳压器非我公司生产,考虑售后服务不方便)
Equip One 3P air compressor; 5000W regulator、computer(computer and air compressor need to purchase by customer)
|
注:此激光机仅用于激光刀模制作,其他特殊用途须经机器供应商同意。 note:This laser cutting machine just can use for die making, if customer want touseforanother,must confirm with supplier.
- 激光刀模切割机
- LASER DIEBOARD CUTTING MACHINE
型号:JLDN1812-600W-F
MODEL: JLDN1812-600W-F
FOSHAN WIN LONGTRADINGCO.,LTD.
技术数据tech data
1 | 激光功率
Laser power |
可以选装激光管 600W 。
Laser tube power: 600W
|
2 | 平台
Platform
|
交叉式平台,激光头固定不动,确保激光光束在工作过程中的最大稳定性,交叉平台驱动模切版沿两个轴动,工作面积:1800*1200mmmm。工作面积通过软件限定及硬件定位开关限定 。 Across form,laser head fixed.it can prove the laser light’shavemaximum stabilization when the machine is working, theacrossform
dirver by X and Y axis move,working area: 1800x1200mm。theworkingarea by the software and hardware positioning swichcurb。 |
3 | 传动
Transmission
|
采用细分步进电机或者伺服电机,运动传递通过精密滚珠丝而完成。,电机与丝杆直连。
Use subdivision stepper motor or servo motor ;Doubledirectionimportprecision ball screw transmission,
motor connect with ball screw directly. |
4 | 测量装置
Measurement
|
多向随动技术,光电装置的测量精度,密封设计可防尘污。
Muti-direction following tech. the electronic and light installlation’scalibration precision.seals designs and dust-proof |
5 | 抽取
Abstraction
|
通过集中式风机对台面及四周的烟气进行抽取,风机可独立放置。By collecting exhaust blower to platformand aroundplace’ssmog,blower can dependence upon place.
|
6 | 水冷却
Cooler
|
机器配备一套水高级气冷却系统,数字科目/精确显示的电子恒温器,专用于激光机的全密封压缩机。 The machine is included one set cooler system. Digitalprogram/precision discover’s electron thermostat.exclusiveusingthe
air-poof compressor of the laser system |
7 | 速度
Speed |
切割速度为 55-65cm/分钟,切割速度取决于激光发生器功率的选择和激光性能及光路,材料成分,材料厚度及形状。 Cutting speed 55-65cm/min,the cut speed upon to thelaser powerand,performance and laser light direction , material basis, thicknessand
shape. |
8 | 精度
Precision
|
定位高精度: ±0.02 mm ,重复精度: ±0.02 mm,以上参数在20度室温下得出,切割精度取决于版材种类,材料成分,材料厚度及形状。
Positioning precision:±0.02 mm,repeat precision:±0.02mm,aboveallof parameter got by 20℃ house digress situation,cut precision belongs to what style material, basis, thickness and shape |
9 | 重量
Weight |
2.0 吨
2.0 tons
|
10 | 机器尺寸
Machine
|
3400mm * 4250mm
Size |
FOSHAN WIN LONGTRADINGCO.,LTD.
11 | 切割材料及厚度
Cutting materialand thickness |
木板 6-22mm,PVC 胶板,亚克力等非金属材料
6-22mm plywood, PVC board and acrylics etc non-metal materials
|
|
12 | 支持输入、输出文件格式Input and output fileformat | DXF,PLT, AI
|
|
13 | 供电电源
Supply power |
单相 220V±5% 50HZ-60HZ 15 A(机器+冷水机)+10A(抽风机)Single phase 220V±5% 50HZ-60HZ 15 A (include themachine,watercooler and exhaust fans)
|
|
14 | 操作系统
Operatin System |
Microsoft windows2000/XP/Vista/WIN7
|
|
15 | 损耗件
Loss part |
激光管、反光镜、聚焦镜
Laser tube,reflect mirror,focus lens
|
|
16 | 使用该设备配备的条件Accessorycondition | 环境
Environm ent |
占地面积 4300mm×4400mm,约 20 平米,环境通风、设有排烟设施,如排气扇
working interspace: 4300mm×4400mm; about 20 squaremeter;need install the exhaust fan.
|
辅
Accessoryequipment |
需要配备 3P 压缩气体、5000W 稳压器、电脑一套(客户自备,主要原因是电脑、
助 设 备 空压机、稳压器非我公司生产,考虑售后服务不方便)
Equip One 3P air compressor; 5000W regulator、computer(computer and air compressor need to purchase by customer) |